Site Menu:
XA SERIES

These Fertilizer Spreaders are built of the highest quality materials.
The steel components are first degreased, then varnished with espossidic powder and dried in an oven at over 200° C.
Suitable for sowing rice, wheat and other cereals as well as spreading salt & sand.
Working speed: from 3 to 16 km/h with power take-off at 540 revs.
ARTICULATED AGITATOR
Supplied upon request, it is recommended
for the spreading of powdery fertilizers. It
is easily and quickly installed		 SPREADING DISC
The rotor blades are able to be regulated and have undergone detailed study to obtain maximum precision and uniformity of distribution.
THREE SPREADING POSSIBILITIES.
These centrifugal fertilizer spreaders have three spreading possibilities, left, centre and right.
Model
Cap LT
Cap KG
Spread M*
Height
Width
Weight KG
XA 150
150
200
14
89cm
90cm
44
XA 250
200
340
14
100cm
100cm
47
XA 300
250
400
14
107cm
107cm
48
XA 400
300
500
14
113cm
113cm
50
XA 500
350
600
14
118cm
118cm
52
*Spreading distance in Metres variable according to the used fertilizer.

P / 6 SERIES


Our continuous study of the problems related to fertilisation has led us the conception and the construction of a fertiliser spreader, series P / 6. This new series of machines guarantee the farmer.

  • Maximum accuracy:
    The spreading system, by means of the oscillating tube, allows the spreading and sowing of different quantities and types of seeds and fertilisers in an extremely uniform manner. Compared to centrifugal models, it does not separate products of different specific weights
  • Maximum functionality:
    Designed to be easy and practical, the machine requires minimum maintenance.
  • Durability of the machine:
    The compartments in direct contact with the fertiliser are made of anticorrosive material and do not require specific maintenance after their use.
  • The hopper, made of shatterproof plastic material, is sustained by a totally demountable steel frame thus allowing transportation costs to be reduced to a minimum.
  • The feeding disk installed on the hopper is made of stainless steel and is built to offer perfect regulation and distribution of the product, even in small quantities.
 

TRANSMISSION GROUP
equipped with a continuos limiter which regulates the spraying angle of the spreading tube from 38 to 58 degrees.
It thus becomes possible to regulate the amplitude of the spreading from a minimum of 6 Metres to a maximum of 20 Metres.

SPREADING
It is possible to choose between two methods of spreading.

A.
Device for uniform spreading

B.
device for localised spreading
MODEL
Capacity
LT / LB
Maximum useful load in
KG / LB
Spreading Distance in
MT/ FT
Height of machine
Width of machine
Weight
KG/ LB
P-406
390/865
600/1320
6/19.5-20/65
87/34
141/55
132/290
P-556
540/1200
750/1650
6/19.5-20/65
101/39.5
143/56
138/304
P-706
690/1535
900/1980
6/19.5-20/65
112/43.5
143/56
142/312
P-906
890/1980
1100/2420
6/19.5-20/65
131/51
143/56
145/319
© Steve Cselka 2001 - 2012