F6 Lopper & Star 50

The most powerful shears in the Campagnola range

The F6 Lopper and Star50 lopper are the most powerful tools in the Campagnola range of pneumatic by-pass pruners. The blade setup is designed in such a way as to allow cuts of up to 50 mm even on hard woods. The F6 ‘Hooked’ blade set up allows the user to hook the anvil over a limb and cut where as the new Star50 (replacing the F6 ‘Straight’) cuts from beneath the branch. The F6/Star50 is available in 7 different lengths, starting with the short, or “no extension”, and then fitted with 1 of the various extension poles starting from the 500mm right up to the 3m pole. Because of its cutting power it is recommended to use the F6/Star50 as a “2-handed operation” tool, even without an extension. The weight of the tool varies from 2.1kg for the short up to 4.1kg for the unit fitted with the 3m pole. The F6/Star50 is suitable for all types of hard wood in orchards, vineyards or forestry.

Running Requirements
An 18cfm compressor will comfortably supply approximately 3 x F6 Loppers. It is recommended that hose with an inside diameter of no less than 6mm be used for lengths up to 100 metres.